Skip to main content

Disclaimer

Acceptance of our Terms :

By visiting the website opportunitytowin.blogspot.in, viewing, accessing or otherwise using any of the services or information created, collected, compiled or submitted to opportunitytowin.blogspot.in, you agree to be bound by the following Terms and Conditions of Service. If you do not want to be bound by our Terms your only option is not to visit, view or otherwise use the services of opportunitytowin.blogspot.in. You understand, agree and acknowledge that these Terms constitute a legally binding agreement between you and opportunitytowin.blogspot.in, and that your use of opportunitytowin.blogspot.in shall indicate your conclusive acceptance of this agreement.
Provision of Services :
You agree and acknowledge that opportunitytowin.blogspot.in is entitled to modify, improve or discontinue any of its services at its sole discretion and without notice to you even if it may result in you being prevented from accessing any information contained in it. Furthermore, you agree and acknowledge that opportunitytowin.blogspot.in is entitled to provide services to you through subsidiaries or affiliated entities.

Proprietary Rights :
You acknowledge and agree that opportunitytowin.blogspot.in may contain proprietary and confidential information including trademarks, service marks and patents protected by intellectual property laws and international intellectual property treaties. opportunitytowin.blogspot.in authorizes you to view and make a single copy of portions of its content for offline, personal, non-commercial use. Our content may not be sold, reproduced, or distributed without our written permission. Any third-party trademarks, service marks and logos are the property of their respective owners. Any further rights not specifically granted herein are reserved.
Submitted Content :
When you submit content to opportunitytowin.blogspot.in you simultaneously grant opportunitytowin.blogspot.in an irrevocable, worldwide, royalty free license to publish, display, modify, distribute and syndicate your content worldwide. You confirm and warrant that you have the required authority to grant the above license to opportunitytowin.blogspot.in.
Termination of Agreement :
The Terms of this agreement will continue to apply in perpetuity until terminated by either party without notice at any time for any reason. Terms that are to continue in perpetuity shall be unaffected by the termination of this agreement.
Disclaimer of Warranties :
You understand and agree that your use of opportunitytowin.blogspot.in is entirely at your own risk and that our services are provided “As Is” and “As Available”. opportunitytowin.blogspot.in does not make any express or implied warranties, endorsements or representations whatsoever as to the operation of the opportunitytowin.blogspot.in website, information, content, materials, or products. This shall include, but not be limited to, implied warranties of merchant ability and fitness for a particular purpose and non-infringement, and warranties that access to or use of the service will be uninterrupted or error-free or that defects in the service will be corrected.
Limitation of Liability :
You understand and agree that opportunitytowin.blogspot.in and any of its subsidiaries or affiliates shall in no event be liable for any direct, indirect, incidental, consequential, or exemplary damages. This shall include, but not be limited to damages for loss of profits, business interruption, business reputation or goodwill, loss of programs or information or other intangible loss arising out of the use of or the inability to use the service, or information, or any permanent or temporary cessation of such service or access to information, or the deletion or corruption of any content or information, or the failure to store any content or information. The above limitation shall apply whether or not opportunitytowin.blogspot.in has been advised of or should have been aware of the possibility of such damages. In jurisdictions where the exclusion or limitation of liability for consequential or incidental damages is not allowed the liability of opportunitytowin.blogspot.in is limited to the greatest extent permitted by law.

External Content :
opportunitytowin.blogspot.in may include hyperlinks to third-party content, advertising or websites. You acknowledge and agree that opportunitytowin.blogspot.in is not responsible for and does not endorse any advertising, products or resource available from such resources or websites.
Jurisdiction :
You expressly understand and agree to submit to the personal and exclusive jurisdiction of the courts of the country, state, province or territory determined solely by opportunitytowin.blogspot.in to resolve any legal matter arising from this agreement or related to your use of opportunitytowin.blogspot.in. If the court of law having jurisdiction, rules that any provision of the agreement is invalid, then that provision will be removed from the Terms and the remaining Terms will continue to be valid.
Entire Agreement :
You understand and agree that the above Terms constitute the entire general agreement between you and opportunitytowin.blogspot.in You may be subject to additional Terms and conditions when you use, purchase or access other services, affiliate services or third-party content or material.
Changes to the Terms :
opportunitytowin.blogspot.in reserves the right to modify these Terms from time to time at our sole discretion and without any notice. Changes to our Terms become effective on the date they are posted and your continued use of opportunitytowin.blogspot.in after any changes to Terms will signify your agreement to be bound by them.

Popular posts from this blog

The Brinell Hardness Test

The Brinell Hardness Test The Brinell hardness test method consists of indenting the test material with a 10 mm diameter hardened steel or carbide ball subjected to a load of 3000 kg. For softer materials the load can be reduced to 1500 kg or 500 kg to avoid excessive indentation. The full load is normally applied for 10 to 15 seconds in the case of iron and steel and for at least 30 seconds in the case of other metals. The diameter of the indentation left in the test material is measured with a low powered microscope. The Brinell harness number is calculated by dividing the load applied by the surface area of the indentation. The diameter of the impression is the average of two readings at right angles and the use of a Brinell hardness number table can simplify the determination of the Brinell hardness. A well structured Brinell hardness number reveals the test conditions, and looks like this, "75 HB 10/500/30" which means that a Brinell Hardness of 75 was obtained us...

VISUAL INSPECTION OF WELDING

VISUAL  INSPECTION OF WELDING INTRODUCTION Inspection starts with examination of the material prior to fabrication, scabs, seams, scale or other harmful surface conditions may be detected in visual inspection. The inspector should check the following : Weld preparation, dimensions and finish.  Clearance dimensions of backing strips.  Alignment and fit up to the pieces being welded.  Verification of cleanliness.  Visual Inspection During Welding Visual inspection checks details of the work while welding is in progress. Among the details to be checked are : Welding process.  Cleaning.  Preheat and inter pass temperature.  Joint preparation.  Filler metal.  Flux or shielding gas.  Chipping, grinding, or gouging.  Post heating temperature and time.  Visual Inspection After Welding Visual inspection is useful for finished-product verification of such items as : Profile irregularities of the weldment....

HARDNESS TEST

HARDNESS TEST Hardness is the property of a material that enables it to resist plastic deformation, usually by penetration. However, the term hardness may also refer to resistance to bending, scratching, abrasion or cutting. Measurement of Hardness: Hardness is not an intrinsic material property dictated by precise definitions in terms of fundamental units of mass, length and time. A hardness property value is the result of a defined measurement procedure. Hardness of materials has probably long been assessed by resistance to scratching or cutting. An example would be material B scratches material C, but not material A. Alternatively, material A scratches material B slightly and scratches material C heavily. Relative hardness of minerals can be assessed by reference to the Mohs Scale that ranks the ability of materials to resist scratching by another material. Similar methods of relative hardness assessment are still commonly used today. An example is the file test where ...